Kubota L2501 specs & fluid capacities
The L2501’s transmission capacity and PTO power depend on its transmission and drive type. Compare the three variants in Kubota’s Winter 2017 specification sheet.
Reviewed 1 primary sourceSee sources
L2501 manual 2WD, manual 4WD and HST 4WD, as documented in the Winter 2017 sheet.
Manual transmission · 2WD
| Engine model | Kubota D1703-M-DI-E4[1] |
|---|---|
| Gross engine power | 24.8 hp at 2,200 rpm[1] |
| PTO power | 20.5 hp at 2,200 rpm[1] |
| Engine oil capacity | 6.0 US qt[1] |
| Cooling system | 6.3 US qt[1] |
| Transmission capacity | 7.1 US gal[1] |
| Front axle capacity | Not applicable: 2WD[1] |
| Fuel capacity | 10.0 US gal[1] |
Manual transmission · 4WD
| Engine model | Kubota D1703-M-DI-E4[1] |
|---|---|
| Gross engine power | 24.8 hp at 2,200 rpm[1] |
| PTO power | 20.5 hp at 2,200 rpm[1] |
| Engine oil capacity | 6.0 US qt[1] |
| Cooling system | 6.3 US qt[1] |
| Transmission capacity | 7.3 US gal[1] |
| Front axle capacity | 6.9 US qt[1] |
| Fuel capacity | 10.0 US gal[1] |
HST transmission · 4WD
| Engine model | Kubota D1703-M-DI-E4[1] |
|---|---|
| Gross engine power | 24.8 hp at 2,200 rpm[1] |
| PTO power | 19.0 hp at 2,200 rpm[1] |
| Engine oil capacity | 6.0 US qt[1] |
| Cooling system | 6.3 US qt[1] |
| Transmission capacity | 6.2 US gal[1] |
| Front axle capacity | 6.9 US qt[1] |
| Fuel capacity | 10.0 US gal[1] |
Using these figures
The specification sheet lists transmission capacity separately for each drive/transmission combination.[1]
These are specification-sheet capacities, not an oil-change procedure. Follow the operator’s manual for fill levels, fluid grades and maintenance.[1]
L2501 figures do not apply to L2502 or another L-series tractor.[1]
Sources
Facts are restated from the manufacturer documents below. Match the exact model, year and variant before using a figure.
- L2501 Detailed SpecificationsKubota · Winter 2017 · Winter 2017: printed pages 2–3; manual 2WD, manual 4WD and HST 4WD columns · retrieved
Primary publishers: Kubota. Spotted an error? Email the address in the footer with the model and the document you are using.